Description
Fiberglass sleeving coated with Polyurethane is manufactured with E-fiberglass braided sleeving and coated with a layer of polyurethane and then thermoset to form F grade insulating sleeving. It possesses reliable heat resistance, good qualities of dielectric, fair softness and elasticity.
Application
It can be used for wiring insulation and mechanic protection for F grade electrical machinery, electrical appliances, electrical instruments, wireless sets and domestic electrical appliances.
Standard Sizes
Sleeving sizes in the following table are based on the size of round conductors that will fit snugly into the product without distortion of the sleeving.
|
Inner Diameter（mm） |
Wall Thickness（mm） |
|
Nominal |
Tolerance |
Minimum |
Maximum |
|
0.8；1.0；1.5；2.0 |
0~+0.3 |
0.40 |
0.60 |
|
2.5；3.0；3.5；4.0；5.0，6.0 |
0~+0.4 |
0.40 |
0.60 |
|
7.0；8.0； |
0~+0.5 |
0.40 |
0.60 |
|
9.0；10；12，14 |
0~+0.5 |
0.55 |
0.85 |
|
16；18；20；22；24 |
0~+0.8 |
0.50 |
0.90 |
Other sizes subject to inquiry
Standard Color
Yellow. Other colors made to order.
Properties
|
Property |
Requirements |
|
Resistance to soldering heat |
Pass (only for sleeving having nominal inner diameter up to and including 5mm) |
|
Bending after heating |
No cracking or detachment of coating shall be visible after bending around mandrels after 48±1h at 180degree |
|
Bending at low temperature |
No cracking or detachment of coating shall be visible after bending around mandrels while at -15degree |
|
Oil and Solvent Resistance |
Passes |
|
Resistance to Acids and Alkalies |
Passes |
|
|
Room temp |
|
Breakdown voltage
Straight mandrel with 25mm electrode |
3.0kV
|
Central value |
4.0 |
|
Lowest value |
2.8 |
|
4.0kV |
Central value |
5.0 |
|
Lowest value |
3.5 |
|
Insulation resistance |
103 |
|
Temperature index(degree) |
155℃ |
Standard Packaging
Coils or spools at manufacturer’s option, unless otherwise specified.
|
Inner Diameter（mm） |
M/roll |
Inner Diameter（mm） |
M/roll |
|
0.8；1.0；1.5；2.0；2.5；3.0；3.5 |
200 |
9.0；10；12，14；16 |
50 |
|
4.0；5.0，6.0；7.0；8.0 |
100 |
18；20；22；24 |
25 |
Note:
Information contained here is precise and reliable. However, being unique, each end-use should be evaluated to satisfy its specific requirements.
SIMO Import & Export Co., ltd. Rm701,Mingquan Building,Lane 3158,Caobao Road,Shanghai 201101, China
Tel: +86 21 64195599，64195566 Fax：+86 2164784263 http://www.simotor.com.cn
|
